Email: info@lisonginc.com Tel:0086-021-58211911
LS380H3

Shot Volume[cm³]:1696

Shot weight[G]:1544

Injection Rate[g/s]:682

Injection Speed[mm/s]:265

Injection Pressure[Mpa]:178

Screw Speed[Rpm]:450

Lisong pine high-speed thin-wall injection molding machine, equipped with an optimized hydraulic system, significantly increased injection speed. Match special fast screw, show higher plasticizing ability. The high rigidity clamping structure can meet the requirement of high speed and high pressure.
Ask Online Email:info@lisonginc.com
Introduce

High speed injection molding machine manufacturing professor

Facing the World Building Chinese brands,Facing Future Focus on top technology

We always take the actual demand of customers as the most important task of Lisong strive to achieve the best cost control and create cost-effective products for customers in the fierce market competition for the dominant position. The process of realizing the dream is hard and difficult, and it is also full of fun. We sincerely invite more people who insist on the same dream to join Lisong camp, and work together with customers and partners to share more value and joy!

10 features of lisong injection molding machine

1: Optimized Toggle Unit Design
Optimized Toggle Unit Design, High speed Clamping unit system, Optimize platen design, Decrease platen deformation, Provide more higher bearing capacity of mold
2: Cam-ring Mechanism
Simple and Precise Mold Thickness Adjusting Mechanism Ensureauto-correct clamping force, Auto-correct clamping force

3:Multistage ejector
Fast ejector action with smooth and steady, Easy to nstall elector rod, Whole-process guidance of ejector, Realizable impulse type ejector

4:More larger space of mold
Suitable for more large mold

5:Large-sized Linear Guide Rail Support
Reduce the deviation of platens, Extend the working life f pull bars, Higher bearing capacity of mold

6:The Advanced Control Interface
High peed microprocessor, Human engineering layout, Direct menu key access, Data image monitoring, Self diagnosis and fault detection capability

7:Closed-loop PID temperature controller
Precise temDerature control, Excellently stable process control

8:Efficient Injection Structure
Uniform load in the screw, Increase the plasticizing capacity, Low energy consumption, Stable structure, make the Injection efficiency higher, Simple production process

9:Precise linear guide rail
Reduce the moving standard deviation in injection process, to ensure that coaxiality of Injection

10:Servo Motor and Drive
More energy saving, Faster response time, High repeatability precision, Lower noise

Product Parameters
Model LS380H3
Injection Unit  
Screw Diameter[mm] 40
Screw L/D Ratio[L/D] 28
Shot Volume[cm³] 1696
Shot weight[G] 1544
Injection Rate[g/s] 682
Injection Speed[mm/s] 265
Injection Pressure[Mpa] 178
Screw Speed[Rpm] 450
Clamping Unit  
Clamping Force[KN] 3800
open stroke[mm] 1000
space between tie-bars[mm] 680*680
Max.mould Height[mm] 750
Min.mould Height[mm] 300
Ejector Stroke[mm] 200
Ejector Force[KN] 150
Others  
Max.Pump Pressure[Mpa] 16
Servo Motor Power[KW] 45+45+15
Heating Power[KW] 38.5
Machine Dimensions(l*W*H)[M] 6.4*1.8*2.0
Oil Tank Cubage[L] 600
Machine Weight(Approximate)[t] 18
Why Choose Us
  • 1.High speedFast speed, production cycle almost doubled

    Taking the production of an eight-thousand-ml circular lid as an example, the cycle of a well-known domestic brand 390T model is more than 7s, and the whole cycle of Lisong LS288G6 is only about 4.8s when the equipment is automatically taken out.

  • 2.Energy savingLow energy consumption, saving over 30% of energy consumption

    The energy consumption of the injection molding machine of the same specification is 35-40kw/hour, a small part of it is barely 35KW/ hour, and the energy consumption of LS288G6 is only 25KW/ hour, which greatly reduces the production cost.

  • 3.StableIntelligent, realize the whole process of unmanned production

    With advanced intelligent technology and mature design of robot module, the product can realize the automation of continuous production process stably, without any manual operation, and achieve the best black light factory mode.

Inquiry Online
* * *
30 years of R & D
Experience
2 Years assurance
Quality
500 Successful Cases
Case
10 patent certificates
Patent
Send Email